Edimax ES-5808PHG Manual - Page 27
Monitoring
![]() |
View all Edimax ES-5808PHG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Figure 1-13-1 ¾ Enable Rate Limit: Click the check box to enable storm control. ¾ Rate (number of frames per second): The Rate field is set by a single drop-down list. The same threshold is applied to every port on the switch. When the threshold is exceeded, packets are dropped, irrespective of the flow-control settings. ¾ Web: Click PORTS, Storm Control. This page enables you to set the broadcast storm control parameters for every port on the switch. Monitoring Figure 1-13-2 Statistic Overview Statistic Overview for all ports User can mirror traffic from any source port to a target port for real-time analysis the following figures shows clearly the statistics overview. 26
![](/manual_guide/products/edimax-es5808phg-manual-df44f9d/27.png)
26
Figure 1-13-1
¾
Enable Rate Limit: Click the check box to enable storm control.
¾
Rate (number of frames per second): The Rate field is set by a single
drop-down list. The same threshold is applied to every port on the switch.
When the threshold is exceeded, packets are dropped, irrespective of the
flow-control settings.
¾
Web: Click PORTS, Storm Control. This page enables you to set the
broadcast storm control parameters for every port on the switch.
Figure 1-13-2
Monitoring
Statistic Overview
Statistic Overview for all ports
User can mirror traffic from any source port to a target port for real-time
analysis the following figures shows clearly the statistics overview.