Edimax IC-3030PoE Manual - Page 14
Camera Installation
View all Edimax IC-3030PoE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
1.5 Camera Installation Please follow the following instructions to set up your IP camera. 1. Unpack the product package and check if anything is missing. 2. Connect the Ethernet cable to your local area network, and connect the other end to the LAN jack of this IP camera. NOTE: You can skip this step if you plan to use wireless LAN only. 3. Plug the power adapter to wall socket, and connect the power connector to the power jack located at the bottom of the IP camera. 4. Connect the antenna to the antenna bases, which is located at the top of this IP camera. (IC-3030Wn only) 5. Place the IP camera at a secure place, and point the camera to the place you wish to monitor. If you wish to hang the IP camera on the ceiling or wall, please use the tripod connector (located at the back of the IP camera) to secure the camera. 6. Launch Internet Explorer on your computer, and following the instructions given in next section to set the IP camera. 14