Electrolux EFDE210TIW Installation Instructions English Spanish French - Page 12
Reversing Door - model
View all Electrolux EFDE210TIW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
12 Reversing Door 1 Protect flat work surface, such as top of dryer or floor near dryer, with a soft cloth or towel. 2 Open dryer door and remove the two hinge screws. Remove lower screw first, then upper screw. 6 Release the door switch striker and move it to the opposite location and reinstall. Set the inner door ring aside. 2 1 3 7 Lift the inner lens and set it aside. 3 Gently place dryer door face down on flat, covered work surface. 4 Locate the 12 screws (no. 1-12) on the inner door ring. Remove and save these 12 screws. 5 Separate inner door ring from the rest of the door. 8 If your model has 8 screws securing the outer lens in place, remove and save them for later. Lift and rotate the outer lens 180°. Lower the outer lens back in place. 180 9 Reinstall the 8 screws if removed in previous step. If no screws were present, move to next step.