Electrolux EFME617STT Installation Instructions English Spanish French - Page 16

Water connection, continued Steam Model only

Get Electrolux EFME617STT PDF manuals and user guides View all Electrolux EFME617STT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

16 Installation Instructions Water connection, continued (Steam Model only) 5. If your installation has room for the COLD water supply to accept the "Y" connector directly, thread the "Y" connector to the COLD water supply and snug it by hand; then tighten it another 2/3 turn with pliers. NOTE If you were able to install the "Y" connector directly to the COLD water supply, please skip to step 8. 6. If there is not room to install the "Y" connector directly, thread the short extension hose on to the COLD water supply and snug it by hand; then tighten it another 2/3 turn with pliers. 7. Thread the "Y" connector to the short extension hose and snug it by hand; then tighten it another 2/3 turn with pliers. 8. Connect the COLD inlet hose for the washer to the "Y" connector and snug it by hand; then tighten it another 2/3 turn with pliers. 9. Connect the straight end of the long hose from the kit to the other outlet on the "Y" connector and snug it by hand. Connect the hose's 90° coupling to the brass water inlet on the back of the dryer and snug it by hand. Tighten each connection of the dryer inlet hose another 2/3 turn with pliers. 10. Turn on the water and check for leaks at all connections. DIRECT CONNECTION OR WITH EXTENSION WATER INLET ON DRYER COLD WATER SUPPLY HOSE TO WASHER

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
16
Installation Instructions
WATER INLET
ON DRYER
DIRECT CONNECTION
OR WITH EXTENSION
COLD WATER SUPPLY
HOSE TO WASHER
5.
If your installation has room for the COLD
water supply to accept the “Y” connector
directly, thread the “Y” connector to the
COLD water supply and snug it by hand;
then tighten it another 2/3 turn with pliers.
6.
If there is not room to install the “Y”
connector directly, thread the short
extension hose on to the COLD water
supply and snug it by hand; then tighten it
another 2/3 turn with pliers.
7.
Thread the “Y” connector to the short
extension hose and snug it by hand; then
tighten it another 2/3 turn with pliers.
8.
Connect the COLD inlet hose for the washer
to the “Y” connector and snug it by hand;
then tighten it another 2/3 turn with pliers.
9.
Connect the straight end of the long hose
from the kit to the other outlet on the “Y”
connector and snug it by hand. Connect
the hose’s 90° coupling to the brass water
inlet on the back of the dryer and snug it by
hand. Tighten each connection of the dryer
inlet hose another 2/3 turn with pliers.
10. Turn on the water and check for leaks at all
connections.
Water connection, continued (Steam Model only)
NOTE
If you were able to install the “Y” connector
directly to the COLD water supply, please skip
to step 8.