Electrolux EI24BC15VS Complete Owners Guide English - Page 19

180° 9 Door Reversal 19 8 10 10 10 7 11 + + + + IMPORTANT Relocate the door switch actuator. + + + 12 7. Install the right top hinge on the left lower corner. 8. Install the right lower hinge on the left top corner. 9. Rotate the door 180 degrees (handle on the right side). Place door on the left lower hinge. Install the hinge pin hook then install the hinge pin. 10. Align the door and top hinge. Install the hinge pin hook then install the hinge pin. 11. The actuator is on the inside top of the door and should be relocated to the bottom of the door. 12. Replace the 2 screws where the actuator was located at the top of the door to conceal the remaining holes. NOTE After the door reversal process, make sure the door switch actuator (12) is installed on the inside bottom of the door.