Electrolux EI24BC15VS Complete Owners Guide English - Page 6

6 Safety Electrical Information • The Wine Cooler/Beverage Center must be plugged into its own dedicated 115 Volt, 60 Hz., 15 Amp, AC only electrical outlet. The power cord of the appliance is equipped with a three-prong grounding plug for your protection against electrical shock hazards. It must be plugged directly into a properly grounded three prong receptacle. The receptacle must be installed in accordance with local codes and ordinances. Consult a qualified electrician. Avoid connecting refrigerator to a Ground Fault Interruptor (GFI) circuit. Do not use an extension cord or adapter plug. • If the power cord is damaged, it should be replaced by an authorized service technician to prevent any risk. • Never unplug the wine cooler by pulling on the power cord. Always grip the plug firmly, and pull straight out from the receptacle to prevent damaging the power cord. • Unplug the Wine Cooler/Beverage Center before cleaning and before replacing a light bulb to avoid electrical shock. • Performance may be affected if the voltage varies by 10% or more. Operating the Wine Cooler/Beverage Center with insufficient power can damage the compressor. Such damage is not covered under your warranty. • Do not plug the unit into an electrical outlet controlled by a wall switch or pull cord to prevent the Wine Cooler/ Beverage Center from being turned off accidentally. Grounding type wall receptacle Do not, under any circumstances, cut, remove, or bypass the grounding prong. Power cord with 3-prong grounded plug This appliance is intended to be used in household and similar applications such as: • Staff kitchen areas in shops, offices and other working environments • Farm houses and by clients in hotels, motels and other residential type environments • Bed and breakfast type environments • Catering and similar non-retail applications • The appliance shall not be exposed to rain To connect your unit: 1 Locate Power cord box inside unit. 2 Remove Power cord from box and insert the plug into the electrical box on the back of the appliance. 3 Connect the plug to electrical source.