Electrolux EWFLW65H Installation Instructions - Page 14

Reversing Door C) Removing Hinge from Front Panel 1 With the hinge in open position, remove 2 short, course-thread, panhead screws on hinge plate. D) Removing Door Lock from Front Panel 1 Remove 2 short, course-thread, panhead screws from the door lock. 2 Remove 3 short, fine-thread, counter-sunk screws in hinge side. Slide the lock toward the outer edge of the front panel. Pivot the lock slightly outward while slowly pulling it through opening to expose the attached harness. 3 Slide the hinge toward the center of the front panel, and then pivot the hinge inward while slowly pulling it away from the front panel to expose the attached harness. 4 Lift up on the tab and the release harness from the retainer, allowing the harness to lay outside the front panel. Release the harness from the terminal with the small lever on back of the lock. S0eparate the harness from the lock, allowing the harness to lay outside the front panel.