Epson 1640XL Product Information Guide - Page 2

EPSON Expression 1640XL Interfaces Light source Reliability Dimensions Weight SCSI-2 (micro DB 50-pin connectors) USB (Type B receptacle connector) Optional IEEE 1394 (FireWire) Xenon gas cold cathode fluorescent lamp 100,000 cycles of carriage movement (main unit MCBF) Width: 25.8 inches (656 mm) Depth: 18 inches (458 mm) Height: 6.9 inches (176 mm) Approximately 46.2 lb (21 kg) Electrical Input voltage range 100 to 120 VAC, ± 10% 220 to 240 VAC, ± 10% Rated frequency 50 to 60 Hz Rated current 100 to 120 VAC: 1.2 A 220 to 240 VAC: 0.7 A Power consumption Operating: Approximately 45 W Approximately 55 W with TPU or ADF unit Standby: Approximately 12 W Environmental Temperature Operating: 41 to 95 °F (5 to 35 °C) 50 to 89 °F using ADF (10 to 32 °C) Storage: −13 to 140 °F (−25 to 60 °C) Humidity (without condensation) Operating: 10 to 80% Storage: 10 to 85% Operating conditions Ordinary office or home conditions. Avoid dust, direct sunlight, and proximity to strong light sources. Safety Approvals 120 V model Safety: UL 1950 CSA C22.2 No. 950 EMC: FCC part 15 subpart B class B CSA C108.8 class B 230 V model Safety: EN 60950 EMC: EN 550022 (CISPR Pub 22) class B AS/NZS 3548 class B SCSI Interface Interface type ANSI X3T9.2/375R Revision 10L (SCSI-2) Logic level TTL-compatible ID setting Selectable from 0 to 7 Terminator Internal active terminator (enable/disable selectable) Connector type Two micro DB 50-pin connectors USB Interface Interface type Universal Serial Bus Specification Revision 1.0 Electrical standard Full speed mode (12Mb) of Universal Serial Bus Specification Revision 1.0 Connector type One receptacle (Type B) Option (ADF/TPU) Interface Connector Interface type For use with the optional automatic document feeder (B813212) and transparency unit (B813202) Output voltage 21.6 to 26.4 VDC 4.75 to 5.25 VDC Output current 1.3 A (24 V) 0.3 A (5 V) Initialization Methods SCSI interface Hardware: Initialized when the scanner is turned on or the scanner receives a SCSI Reset signal from the SCSI interface Software: Initialized when the software sends the Esc @ (initialize the scanner command), or the scanner receives a SCSI Bus Device message USB interface Hardware: Initialized when the scanner is turned on or the USB cable is unplugged from the USB port on the scanner Software: Initialized when the software sends the Esc @ command or the scanner receives a Bus Reset from the USB interface 2 - EPSON Expression 1640XL 8/00