Epson 2000P Product Information Guide - Page 3

EPSON Stylus Photo 2000P Paper Paper type Size Paper types Thickness Weight Single sheets Letter (8.5 × 11 inches) Legal (8.5 × 14 inches) Half letter (statement, 5.5 × 8.5 inches) Executive (7.5 × 10 inches) A4 (210 × 297 mm) A5 (148 × 210 mm) A3 (11.7 × 16.5 inches) B (11 × 17 inches) Super B (13 × 19 inches) Plain bond paper and special papers distributed by EPSON 0.003 to 0.004 inch 17 to 24 lb (0.08 to 0.11 mm) (64 to 90 g/m2) for plain bond for plain bond paper paper EPSON Archival Matte Letter (8 1/2 x 11 inches) Special papers distributed by EPSON - - Paper A3 (11.7 x 16.5 inches) Super B (13 x 19 inches) EPSON Watercolor Paper Super B (13 x 19 inches) Special papers distributed by EPSON - - - Radiant White EPSON Premium Letter (8 1/2 x 11 inches) Special papers distributed by EPSON - - Semigloss Photo Paper Super B (13 x 19 inches) 4 inch x 26 ft roll EPSON Premium Luster Letter (8 1/2 x 11 inches) Special papers distributed by EPSON - - Photo Paper A3 (11.7 x 16.5 inches) Super B (13 x 19 inches) 8.3 inch x 32.8 ft roll 13.0 inch x 32.8 ft roll Envelopes No. 10, 4.1 × 9.5 inches (104 × 241 mm) Plain, bond, or air mail paper DL, 4.3 × 8.7 inches (110 × 220 mm) C6, 4.4 × 6.4 inches (114 × 162 mm) 0.006 to 0.016 inch 12 to 20 lb (0.16 to 0.43 mm) (45 to 75 g/m2) Always load paper into the sheet feeder short edge first, except for envelopes. Load envelopes flap edge first with the flap side down. Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, EPSON cannot attest to the quality of any non-EPSON brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs. Poor quality paper may reduce print quality and cause paper jams and other problems. If you encounter problems, switch to a higher grade of paper. Do not load curled or folded paper. Use papers under these conditions: Temperature: 59 to 77 °F (15 to 25 °C) Humidity: 40 to 60% RH Printable area A B-L** * single sheets B-R** A B-L** C * envelopes B-R ** C A: The minimum top margin is 0.12 inch (3.0 mm). B-L: The minimum left margin is 0.12 inch (3.0 mm). B-R: The minimum right margin is 0.12 inch (3.0 mm). C: The minimum bottom margin is 0.55 inch (14.0 mm). * You can extend the minimum bottom margin to 0.12 inch (3.0 mm) by selecting Maximum as the Printable Area setting. However, print quality may decline in the expanded area. Before printing large jobs, print a single sheet to confirm print quality. ** When Roll Paper-No Margins or Sheet Feeder-No Margins is selected as the Paper source, the left and right margins are 0 (available only at certain paper widths: 4, 8.3, 8.5, 13 [12.95 Macintosh]). 6/00 EPSON Stylus Photo 2000P - 3