Epson 2080 User Manual - Page 163

Using the Optional Cut-Sheet Feeders When you install the optional high-capacity cut-sheet feeder (C80673V), you can load up to 150 single sheets of paper in the printer. You can also create a double-bin cut-sheet feeder by connecting the second bin cut-sheet feeder (C80674V) to the high-capacity cut-sheet feeder. The double-bin cut-sheet feeder allows you to load two different types of single-sheet paper in the printer at the same time and easily switch between them. To assemble the double-bin cut-sheet feeder and load paper in the second-bin cut-sheet feeder, see the second-bin cut-sheet feeder manual. For instructions on selecting bin 1 or bin 2 of the double-bin cut-sheet feeder, see page A-10. Note: The second-bin cut-sheet feeder can be used only in combination with the highcapacity cut-sheet feeder; you cannot use it alone. Installing the high-capacity or double-bin cut-sheet feeder You install the high-capacity cut-sheet feeder and double-bin cut-sheet feeder in the same way. Follow the steps below. Note: Before installing the double-bin cut-sheet feeder, assemble it as described in the cut-sheet feeder manual. w Warning: You will need to move the print head by hand before installing the cut-sheet feeder. If you have just used the printer, the print head may be hot; let it cool for a few minutes before touching it. 1. Make sure the printer is turned off. c Caution: Be sure to turn off the printer. You will need to move the print head to the ribbon installation position before installing the high-capacity or double-bin cut-sheet feeder, and moving the print head while the printer is on may damage the printer. 2. Remove the paper guide and printer cover. Slide the print head to the ribbon installation position (the indented portion of the paper tension unit) by hand. A-4 Enhancing Your Printer With Options