Epson 2255U Users Guide - Page 45
Connecting to an External Computer Monitor, HDBaseT, Control Communications, RS-232C, Extron XTP
View all Epson 2255U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
1. Turn off the projector and HDBaseT transmitter. Note: Make sure the projector and HDBaseT transmitter are turned off when connecting or disconnecting a network cable between the two devices. 2. Connect one end of the network cable to the HDBaseT port on the transmitter. 3. Connect the other end to the projector's HDBaseT port. Note: See the documentation that came with the HDBaseT transmitter for instructions on connecting it to your video device or computer. 4. Turn on the projector and HDBaseT transmitter. Note: To enable communication from the Ethernet and serial ports on the transmitter, select On as the Control Communications setting in the projector's Extended menu. Turning on this setting disables the projector's LAN and RS-232C ports. If you connected an Extron XTP transmitter or switcher to the projector's HDBaseT port, select On as the Extron XTP setting in the projector's Extended menu. Parent topic: Projector Connections Related references Projector Setup Settings - Extended Menu Connecting to an External Computer Monitor If you connected a computer to the projector's Computer port, you can also connect an external monitor to the projector. This lets you see your presentation on the external monitor even when the projected image is not visible. 45