Epson 7700p User Manual - Page 66
Replacing the Lamp
View all Epson 7700p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
4. If you need to replace the filter, pull on the catch to remove it. Make sure the projector is on its side as shown (not turned upside down) to prevent dust from falling inside. tabs note You can check to see how many hours the lamp has been used. See page 54. 5. To install the new filter, first insert the tabs, then press on the catch until it clicks in place. Replacing the Lamp The projection lamp typically lasts for about 1500 hours of use. It is time to replace the lamp when: I The projection image gets darker or starts to deteriorate. I The lamp warning light is flashing red or orange. I The message LAMP REPLACE appears on the screen when the projector lamp comes on (after about 1400 hours of use). To maintain projector brightness and image quality, replace the lamp as soon as possible. Contact your dealer or call EPSON at (800) 873-7766 in the United States and Canada for a replacement lamp. Request part number ELPLP12. 60 Maintaining and Transporting the Projector