Epson ActionLaser 1500 User Setup Information - Page 14
MAINTENANCE, Replacing the Imaging cartridge - fuser
View all Epson ActionLaser 1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Maintenance Replacing the Imaging cartridge The imaging cartridge prints up to 6,000 pages depending upon the complexity of your print jobs. If your printed images become faint, enter the SelecType Level 2 TONER option to find out approximately how much toner remains in the imaging cartridge. Simply count the asterisks between the E (empty) and the F (full). Each asterisk represents up to 20% of the total toner capacity. When you see only one asterisk on the SelecType TONER message indicating that there is less than 20% toner left, you should replace the imaging cartridge. e WARNING: Do not touch the fuser, which is marked with a CAUTION HOT SURFACE label. 1. Turn on the printer. Note: If you replace the cartridge when the power is off, you must change the TONER setting using SelecType when you turn on the printer. See steps 7 and 8 later in this section. Maintenance 11