Epson BrightLink 450Wi Installation Guide - Page 25

Use the left adjustment dial to adjust the horizontal roll, Adjust the vertical position, E

Get Epson BrightLink 450Wi - Interactive Projector PDF manuals and user guides View all Epson BrightLink 450Wi manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

English G Use the left adjustment dial to adjust the horizontal roll (1) Loosen the screw that corresponds to the left adjustment dial (A). (2) Turn the adjustment dial to adjust the horizontal roll (B). E I (3) After you finish making all of the adjustments in steps to , tighten the screw you loosened in A. H Adjust the vertical position Adjust the vertical position with the two M8 x 35 mm hexagon socket head cap bolts at the bottom of the setting plate. Tightening the bolts raises the setting plate, and loosening them lowers it. The projection screen is raised or lowered accordingly. After you make this adjustment, you may need to readjust the vertical tilt, as described on page 24. M8 x 35 mm hexagon socket head cap bolts (2) 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
25
English
G
Use the left adjustment dial to adjust the horizontal roll
(1)
Loosen the screw that corresponds to the left adjustment dial (
A
).
(2)
Turn the adjustment dial to adjust the horizontal roll (
B
).
(3)
After you finish making all of the adjustments in steps
E
to
I
, tighten the screw you
loosened in
A
.
H
Adjust the vertical position
Adjust the vertical position with the two M8 x 35 mm hexagon socket head cap bolts at the bottom of
the setting plate. Tightening the bolts raises the setting plate, and loosening them lowers it.
The projection screen is raised or lowered accordingly. After you make this adjustment, you may need
to readjust the vertical tilt, as described on page 24.
M8 x 35 mm
hexagon socket
head cap bolts (2)