Epson BrightLink 450Wi Installation Guide - Page 28
Appendix, Using the Easy Interactive Function BrightLink 450Wi Only, Attaching a Security Cable - driver
View all Epson BrightLink 450Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Warning ❏ Never loosen the bolts and nuts after installation. Confirm that the screws have not become loose on a regular basis. If you find any loose screws, tighten them firmly. If the screws are not tightened firmly, the projector or setting plate may fall and cause personal injury or property damage. ❏ Do not hang on the setting plate or hang a heavy object on the setting plate. If the projector or setting plate falls, it could cause personal injury or property damage. 8. Appendix Using the Easy Interactive Function (BrightLink 450Wi Only) After you install the BrightLink 450Wi, you need to install the Easy Interactive Driver and perform calibration (to align the positions of the cursor and Easy Interactive Pen). For details, refer to the supplied Quick Guide or the User's Guide on the BrightLink 450Wi CD-ROM. Attaching a Security Cable If the projector is to be installed in a room where it will be left unattended, you can use a commercially available theft-prevention wire lock to secure the projector to a post or other object to prevent someone from taking it. Pass the wire of the theft-prevention wire lock through the security cable installation point. For details on how to lock the wire lock, refer to the User's Guide supplied with the wire lock. After installation of the BrightLink 450Wi is complete , make sure you leave the pens, remote control, batteries, software CDs, and Quick Guide in the room with the projector. 28