Epson BrightLink Pro 1430Wi User Manual - Page 279
Power light, Status light, Lamp light, Status and solution, High Altitude
View all Epson BrightLink Pro 1430Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 279 highlights
Power light Blue Status light Off Lamp light Temp light Off Off Off Flashing blue Off Orange Off Flashing blue Orange Off Flashing blue Varies Flashing orange Varies Status and solution Standby or sleep mode. Network monitoring mode. The projector is being monitored and controlled over the network. Projector has overheated and turned off. Leave it turned off to cool down. After about five minutes, do the following: • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Clean or replace the air filter. • If operating the projector at high altitude, turn on High Altitude Mode. • If the problem persists, unplug the projector and contact Epson for help. Lamp has a problem. • Check to see if the lamp is burned out, broken, or installed incorrectly. Reseat or replace the lamp as necessary. • Clean or replace the air filter. • If operating the projector at high altitude, turn on High Altitude Mode. • If the problem persists, unplug the projector and contact Epson for help. Replace the lamp soon to avoid damage. Do not continue using the projector. 279