Epson BrightLink Pro 1430Wi User Manual - Page 292
Solutions When the Interactive Pen Position Is Not Accurate
View all Epson BrightLink Pro 1430Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 292 highlights
• Make sure you have calibrated the system. Try recalibrating. • If you are projecting from a laptop computer, make sure the battery has enough power, or connect the laptop to a power outlet. • Make sure the Pen Mode and Pen Operation Mode settings are set correctly in the Easy Interactive Function options on the Extended menu. • If you are using multiple projectors in the same room, change the Distance of Projectors setting in Easy Interactive Function > Advanced on the Extended menu. Parent topic: Solving Interactive Problems Related tasks Replacing the Interactive Pen Tips Replacing the Interactive Pen Batteries Solutions When the Interactive Pen Position Is Not Accurate If the pen position is not the same as the mouse pointer, try the following solutions: • Make sure you have calibrated the system. Try manual calibration. • Make sure the cable cover is in place to keep cables from blocking the signal. • Try adjusting the pen operation area. • If you use the E-Zoom + button on the remote control to enlarge the image, the pen position is not accurate. When you return the image to the original size, the position should be correct. • In PC Interactive mode (in the Extended > Advanced menu), turn off Auto Adjust Pen Area and select Manual Adj. Pen Area. • Try changing the computer's resolution to 1280 × 800. Parent topic: Solving Interactive Problems Related concepts Pen Calibration Related references Projector Setup Settings - Extended Menu Related tasks Adjusting the Pen Operation Area Zooming Into and Out of Images Removing and Attaching the Cable Cover 292