Epson CX5600 User Guide - Page 64
Remove and Install Cartridges, Turn on the Epson Stylus CX5600 Series. - scanner
UPC - 010343865341
View all Epson CX5600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Remove and Install Cartridges Be sure you have your replacement cartridges handy before you begin. You must install new cartridges immediately after removing the old ones. Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Keep the ink cartridges out of the reach of children and don't drink the ink. 1. Turn on the Epson Stylus CX5600 Series. If a cartridge is expended, the ink light on the control panel stays on. You must replace the cartridge to be able to print. Note: If the ink light on the control panel is flashing or off and you need to change a cartridge, run the Ink Cartridge Replacement utility instead of following the instructions below. 2. Open the scanner and make sure its support locks in place. Caution: Do not touch any area shown below. 3. Press the button. The print head moves to the position to indicate which cartridge is low or expended. 64