Epson CX6600 Product Information Guide - Page 12
Checking Ink Cartridge Levels, Removing and Installing Ink Cartridges, If an ink cartridge is empty - stylus ink cartridges
UPC - 010343851436
View all Epson CX6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Epson Stylus CX6600 Checking Ink Cartridge Levels To check ink levels, follow these steps: 1. Press the Setup button to enter Setup Mode. 2. If necessary, press the upper left button next to the LCD screen until Ink levels is displayed, then press the x Color button. The LCD screen displays the percentage of ink available in each cartridge: C (Cyan), M (Magenta), Y (Yellow), and K (Black). Ink levels C:50% M:50% Y:50% Note: To view ink levels for all of the cartridges, wait for them to scroll across the LCD screen. 3. When done, press the OK button. When your ink starts getting low, make sure you have replacement cartridges available. You cannot print if an ink cartridge is empty. Removing and Installing Ink Cartridges Follow these steps to replace a cartridge: 1. Make sure the CX6600 is turned on and not printing. 2. If an ink cartridge is empty: Check the LCD screen to see which cartridge is empty, then press the x Color button. If an ink cartridge is low: Press the Setup button to enter Setup Mode, then press the top left button next to the LCD screen until Replace ink is displayed. Finally, press the x Color button. 3. Lift up the scanner. 4. Wait for the ink cartridge holder to move to the replacement position, then open its cover. 5. Identify the cartridge you need to replace. Press in the tab at the back of the cartridge to release it, then lift the cartridge straight out. Dispose of it carefully. Note: The illustration above shows the black cartridge being removed. Only remove the cartridge(s) you need to replace. 6. Before unwrapping the new cartridge, shake it gently four or five times. Then remove it from its wrapper. Caution: Don't touch the green circuit board on the front of the cartridge; you may inhibit normal operation and printing. 7. Lower the new cartridge into its holder, then press down firmly until it clicks into place. 12 - Epson Stylus CX6600 If you need to replace other ink cartridges, repeat steps 5 through 7 before continuing with step 8. 6/04