Epson DM-D500 User Manual - Page 6
DIP Switches, DSW 1, Transfer Speed Switching
View all Epson DM-D500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
English DIP Switches The DIP switches configure the communication settings and whether a self-test is required. CAUTION: Do not remove the DIP switch cover until after turning the power off. Removing the cover while the power is turned on may damage the device. DSW 1 DSW1 No. Function ON OFF 1-1 Received Error Data Ignore "?" Display 1-2 Hand shaking XON/XOFF (*1) DTR/DSR 1-3 Receive Data Length 7bit 8bit 1-4 Parity With Parity No Parity 1-5 Parity Selection Even Odd 1-6 Communication Speed See "Transfer Speed Switching." 1-7 Switching 1-8 (*1) XON/XOFF is effective only when the DM-D500 is connected with a stand alone. Default Setting OFF OFF OFF OFF OFF ON OFF ON Transfer Speed Switching SW1-6 ON OFF ON OFF ON OFF ON SW1-67 ON ON OFF OFF ON ON OFF SW1-8 ON ON ON ON OFF OFF OFF Transfer Speed (bps) 2400 4800 9600 (Default) 19200 38400 57600 115200 DSW 2 DSW1 No. 2-1 2-2 2-3 2-4 2-5 2-6 2-7 2-8 Function Y-connection (*1) Self test selection (*2) 20 column and 2 line mode selection (*3) Device selection default setting (*4) Address 0 Address 1 Address 2 Reserved (*5) ON OFF Enable Disable Perform self test Do not perform 20 column and 256 x 64 dots 2 line mode mode Printer is selected Display is selected The display device number (1-7) corresponds to Address number 0 to 2. (All OFF are regarded as no display number.) - Fixed to OFF Default Setting OFF OFF OFF OFF OFF OFF OFF OFF 4 DM-D500 User's Manual