Epson ELPDC07 Users Guide - Page 30

Symbols Indicating the Device Meets the IEC60950-1 A2 Safety Standards 30 The following table describes the safety symbols displayed on the product. No. Symbol Supported Standard Explanation A IEC60417 Power ON No.5007 Indicates connection to power supply. B IEC60417 Power OFF No.5008 Indicates disconnection from power supply. C IEC60417 Standing by No.5009 Indicates electricity is being supplied to part of the device/equipment when the switch or position of the device/ equipment is in standby status. D ISO7000 Caution No.0434B Indicates caution must be taken when IEC3864-B3.1 handling the product. E IEC60417 Caution (Hot) No.5041 Indicates parts of the product that should not be touched accidentally due to high temperatures. F IEC60417 Caution (Danger of Electric Shock) No.6042 Indicates that the device/equipment ISO3864-B3.6 presents a risk of electric shock. G IEC60417 Indoor Use Only No.5957 Indicates that the device/equipment is for indoor use only. H IEC60417 Power Connector Polarity No.5926 Indicates the positive and negative electrodes for DC power devices that can be connected. I IEC60417 Batteries (General) No.5001B Indicates that batteries are used to power the device/equipment. Displayed on the battery case cover or connection port. No. Symbol Supported Standard Explanation J IEC60417 Battery Direction No.5002 Indicates the direction of the batteries on the outside or inside of the battery case. K IEC60417 Protective Grounding No.5019 Indicates an external conductor to safeguard against electric shocks if a malfunction occurs by using a connection port or grounding safeguard port. L IEC60417 Grounding No.5017 Indicates a grounding port when No. 11 is not explicitly called for. M IEC60417 AC Current No.5032 Indicates the device/equipment uses a dedicated AC current, and has an AC current supported port. N IEC60417 Direct Current No.5031 Indicates the device/equipment uses a dedicated DC current, and has a DC current supported port. O IEC60417 Class II Equipment No.5172 Indicates the device/equipment meets the JIS C 9335-1/JIS C 8105-1 safety requirements for Class II equipment. P ISO 3864 General Prohibition Indicates unidentified general prohibited items. Q ISO 3864 Do Not Touch Indicates that touching specific parts of the equipment is prohibited since an injury could occur. R --- Indicates that you should not look into the projector's lens while it is projecting.