Epson ELPDC07 Users Guide - Page 8

Document Camera Parts Top/Side/Rear Name A Camera head B Foot C Camera arm D Security slot E [Freeze] button Function s "Camera Head" p.9 Extend the foot when installing. Extends or retracts to adjust the height of the camera head. The security slot is compatible with the Microsaver security system manufactured by Kensington. Freezes live images. Press the button again to resume projection. The indicator turns on when the image is frozen. The audio does not stop. 8 Name F [Focus] button G [z] [x] buttons H [ ] button I [Source Search] button J Power indicator K USB port (type B) L Flicker Reduction switch M Mic switch Function Focuses the image automatically. The document camera cannot focus on objects that are approximately 10 cm (4 inches) or less from the surface of the camera lens. If you want to adjust the white balance, press and hold this button for approximately five seconds. Enlarges or reduces the image without changing the projection size. Turns the LED lamp on or off. Changes the image projected from the projector. When multiple devices are connected to the projector, press the button repeatedly until the image you want to display is shown. This is not available when the document camera is connected to a computer. This indicator comes on when power is supplied from a projector or computer. Connects the document camera to a projector or computer using the USB cable supplied. Change to 50Hz or 60Hz according to the power frequency in the area you live. This reduces flickering in images. Set this to Off to disable input from the internal microphone. This should usually be set to On.