Epson ELPDC30 Users Guide - Page 44

On-Screen Menu Table 44 Setup Item Explanation Output Resolution Sets the output resolution when connecting an HDMI cable to the HDMI port. You can select the maximum resolution of your output device from the following options. The highest one is the maximum resolution that the document camera can support. 3840×2160 @ 60 3840×2160 @ 30 1920×1080 1280×720 1024×768 This menu is not available when connected via Miracast. USB Streaming Format You can enable H.264 so that H.264 can be selected as the streaming format when connecting via USB. H.264 On: Enables H.264. H.264 Off: Disables H.264. Flickerless Eliminates flicker when giving presentations in regions with different electrical systems. 50Hz 60Hz HDMI Link When an image device that supports the HDMI CEC standard is connected to the document camera, operations for the document camera and the image device can be linked together. When this is set to On*, the connected device turns on when the document camera is turned on. A change to this setting takes effect after the document camera is turned off. Sleep Mode Operation settings when the document camera is inactive. On: The power automatically turns off if the document camera is inactive for a certain amount of time. Off: The power remains on even if the document camera is inactive for a certain amount of time. Sleep Mode Timer Sets the amount of time, in the range of 1 to 6 hours, before the document camera automatically turns off. Mic. Volume The volume of the built-in microphone can be manually adjusted. To increase the volume, select + and hold down the [Enter] button. To decrease the volume, select − and hold down the [Enter] button. Information Displays the product name, firmware version, and MAC address of the document camera. Reset Resets the menu settings to factory defaults. * Default setting at time of purchase