Epson ELPDC30 Users Guide - Page 60
Safety Standard Compliance Symbols and Descriptions, Symbol mark, Approved, standards, Explanation
View all Epson ELPDC30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Safety Standard Compliance Symbols and Descriptions 60 The following table lists the meaning of the safety symbols labeled on the equipment. No. Symbol mark Approved standards Explanation A IEC60417 "ON" (power) No.5007 To indicate connection to the mains. B IEC60417 "OFF" (power) No.5008 To indicate disconnection from the mains. C IEC60417 Stand-by No.5009 To identify the switch or switch position by means of which part of the equipment is switched on in order to bring it into the stand-by condition. D ISO7000 Caution No.0434B To identify general caution when using IEC3864-B3.1 the product. E IEC60417 Caution, hot surface No.5041 To indicate that the marked item can be hot and should not be touched without taking care. F IEC60417 Caution, risk of electric shock No.6042 To identify equipment that has risk of ISO3864-B3.6 electric shock. G IEC60417 For indoor use only No.5957 To identify electrical equipment designed primarily for indoor use. H IEC60417 Polarity of d.c. power connector No.5926 To identify the positive and negative connections (the polarity) on a piece of equipment to which a d.c. power supply may be connected. No. Symbol mark Approved standards Explanation I IEC60417 Battery, general No.5001B On battery powered equipment. To identify a device for instance a cover for the battery compartment, or the connector terminals. J IEC60417 Positioning of cell No.5002 To identify the battery holder itself and to identify the positioning of the cell(s) inside the battery holder. K IEC60417 Protective earth No.5019 To identify any terminal which is intended for connection to an external conductor for protection against electric shock in case of a fault, or the terminal of a protective earth electrode. L IEC60417 Earth No.5017 Indicates a grounding port when No.11 is not explicitly called for. M IEC60417 Alternating current No.5032 To indicate on the rating plate that the equipment is suitable for alternating current only; to identify relevant terminals. N IEC60417 Direct current No.5031 To indicate on the rating plate that the equipment is suitable for direct current only; to identify relevant terminals. O IEC60417 Class II equipment No.5172 To identify equipment meeting the safety requirements specified for Class II equipment according to IEC 61140. P ISO 3864 General prohibition To identify actions or operations that are prohibited.