Epson EMP-7100 Owners Manual - Page 93
Be sure to always use a new projector lamp. Otherwise
![]() |
View all Epson EMP-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Contact your local EPSON dealer for a replacement lamp. Use only replacement lamp part number. x Note: Be sure to always use a new projector lamp. Otherwise the projector lamp operating time display will indicate incorrect information. x Warning: Allow the lamp to cool down before replacing it. During use, it becomes hot enough to burn you. 1. Switch off the projector and disconnect the power cable from the wall socket. 2. Use a screwdriver, coin or similar object to loosen the two retaining screws on the lamp cover. You cannot remove these screws. 3. When the screws are loose, lift off the lamp cover. lamp cover Replacing the Lamp 75
![](/manual_guide/products/epson-emp-5100-owners-manual-c67e901/93.png)
75
Contact your local EPSON dealer for a replacement lamp. Use only
replacement lamp part number.
◆
Note:
Be sure to always use a new projector lamp. Otherwise the
projector lamp operating time display will indicate incorrect
information.
◆
Warning:
Allow the lamp to cool down before replacing it. During
use, it becomes hot enough to burn you.
1.
Switch off the projector and disconnect the power cable from the
wall socket.
2.
Use a screwdriver, coin or similar object to loosen the two
retaining screws
on the lamp cover. You cannot remove these
screws.
3.
When the screws are loose, lift off the lamp cover.
Replacing the Lamp
lamp cover