Epson EMP-7700 User Manual - Page 26
Turning On Your Equipment, Turning On the Projector
UPC - 010343832572
View all Epson EMP-7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Turning On Your Equipment Make sure your projector and other equipment are set up and connected correctly, as described in Chapter 1 or Appendix A. Then turn on your projector, as described below, followed by any equipment you've connected to it. You can turn on your computer and video equipment in any order, but if you have more than one computer or video source connected, you may have to switch to the desired source as described on page 27. Turning On the Projector Follow these steps to plug in and turn on the projector: 1. Connect one end of the power cord to the projector's power inlet. 2. Connect the other end to a grounded electrical outlet. The power light on the projector's control panel turns orange, indicating that the projector is receiving power but not yet turned on. 3. Remove the lens cap. 20 Using the Projector