Epson Endeavor 486I User Manual - Page 112
Cover in Then see Using the Fixed Disk Setup, the computer's cover
View all Epson Endeavor 486I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
3. Slide the bracket away from the mounting area and lift it out 4. Remove the screws securing the hard disk drive to the bracket and slide the drive out of the bracket. 5. Replace the bracket following the instructions under "Replacing the Bracket in the Computer." 6. If you have finished installing or removing drives, replace the computer's cover, as described under "Replacing the Cover" in Chapter 4. Then see "Using the Fixed Disk Setup 0ption" in Chapter 2 for instructions on defining your new drive configuration. 5-14 Installing and Removing Slimline Drives
3.
Slide the bracket away from the mounting area and lift it out
4.
Remove the screws securing the hard disk drive to the
bracket and slide the drive out of the bracket.
5.
Replace the bracket following the instructions under
“Replacing the Bracket in the Computer.”
6.
If you have finished installing or removing drives, replace
the computer’s cover, as described under “Replacing the
Cover” in Chapter 4. Then see “Using the Fixed Disk Setup
0ption” in Chapter 2 for instructions on defining your new
drive configuration.
5-14
Installing and Removing Slimline Drives