Epson Endeavor 486I User Manual - Page 34
Running SETUP and Installing Drivers, System Setup options
View all Epson Endeavor 486I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
System Setup options Option Settings System Time System Date hh:mm:ss mm dd, YYYY Video System EGA/VGA * Monochrome CGA 80X25 System Memory system memory size Extended Memory extended memory size Diskette Drive A and B Keyboard 3.5 inch, 1.44MB * (A) 3.5 inch, 720KB 5.25 inch, 1.2MB 5.25 inch, 360KB 3.5 inch, 2.88MB Not installed * (B) Installed * Not installed Description Sets the time and date: once they are set, you should not need to change them, unless you adjust the time for daylight savings or a different time zone (the computer automatically changes the date for leap years) Defines the type of display you are using: if you have connected a VGA or SVGA monitor to the built-in monitor port, select EGA/VGA (1) Detects and displays system and extended memory size automatically: you cannot change these values (2) Defines the types of diskette drives installed as drives A and B Enables or disables keyboard testing during power-on diagnostics: select Not Installed if you plan to use your system without a keyboard (as a network server, for instance) so you do not receive keyboard errors * Default setting (1) If you installed a video adapter card, make sure you disable the on-board SVGA controller by setting jumper JP50 to position 2-3; see "Changing the Jumper Settings" in Chapter 4 for instructions. (2) If the system memory and Extended memory values are not correct, check that the SlMMs are securely seated in their sockets, as described in "Installing Memory Modules (SIMMs)" in Chapter 4. 2 - 4 Running SETUP and Installing Drivers