Epson LQ-850X User Manual - Page 241
button. Also, make sure that, DIP switch 2-7 short tear-off is off.
View all Epson LQ-850X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 241 highlights
Problem Continuous paper does not feed properly (continued). When printing labels, the labels either do not feed or feed incorrectly. Switching between single sheets and continuous paper cannot be performed properly. When the LOAD/EJECT button is pressed to load continuous paper, the platen does not rotate and the paper is not loaded. Solution You may not be using the correct type of labels. Read through the section on printing on special paper for the correct type of labels to use. See Chapter 2. You may be trying to back-feed labels through the printer. This can cause labels to come off their backing and jam the printer. Do not feed labels using the LOAD/EJECT button. Also, make sure that DIP switch 2-7 (short tear-off) is off. If a label does become jammed in the printer mechanism, see your Epson dealer for assistance. Pull the paper release lever forward to the continuous paper position, set the paper, then press the LOAD/EJECT button. See Chapter 2. 7-24 Troubleshooting