Epson MegaPlex MG-50 User Manual - Page 64
Checking the Projector Status, Storing the Projector
View all Epson MegaPlex MG-50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Checking the Projector Status You can use the Info menu to view information about the current display and how long the projection lamp has been in use. To access the Info menu: 1. Press the Menu button on the remote control. 2. Use the menu navigation buttons to open the Info menu. The following information appears: ■ Lamp Hours ■ Source ■ Input Signal ■ Resolution ■ Refresh Rate ■ Sync Info ■ Serial Number ■ Status (error information) Note: The information displayed depends on the currently selected image source. The Lamp Hours shows 0H until you've used the lamp for at least 10 hours. The resolution indicates the total number of scan lines in the source signal. The number of visible scan lines depends on the signal format standard and selected display (see page 75). Storing the Projector If you need to store the projector for an extended time, do the following: ■ Make sure the temperature of the storage area is within 14 to 140 °F (-10 to 60 °C). ■ Close the lens cover and retract the feet. ■ Close the dock. ■ Remove the batteries from the remote control. ■ Pack the projector in its original packaging or equivalent. 64 Maintenance