Epson PP-100II Product Information Guide - Page 2

Epson Discproducer PP-100 Operation panel Disc cover USB interface connector AC inlet Hook for interface cable Accessories Ink cartridges Part number / Description C13S020447 = Cyan C13S020448 = Light Cyan C13S020449 = Light Magenta C13S020450 = Magenta C13S020451 = Yellow C13S020452 = Black Dye-based ink Main power switch Ink cover Disc access cover Air vents DVD drive 1 DVD drive 2 Picker arm Stacker 1 Reliability ≥ 1000 prints at 16.7% coverage per color Life = 2 years after production or 6 months after installation Dimensions = 1.65 x 3.27 x 104" (W x D x H) {42 x 83 x 26.4 mm} Weight = 0.14 lb {64 g} Printer Stacker 3 Stacker 4 Lock lever Stacker 2 Operating Environment Discproducer supports the following operating systems: ❏ Microsoft Windows 2000 SP4 or higher ❏ Microsoft Windows XP SP2 or higher ❏ Microsoft Windows Vista™ SPI or later Computer requirements: Pentium 4 1.4 GHz or higher CD/DVD Specifications CD/DVD Description Type CD-R, DVD-R, DVD+R, DVD-R DL, DVD+R DL Outer diameter 4.72" ± 0.012" {120 mm ± 0.3 mm} Inner diameter 0.59" + 0.004/-0" {15 mm + 0.1/- 0 mm} Thickness 0.047" + 0.012"/-0.004" {1.2 mm + 0.3/- 0.1 mm} Label side Must be ink jet printable (thermal not supported). The specified disc has a moisture-adhesive ink receptor layer on the label surface. Discs may stick to each other if stacked in high humidity or high temperatures. Glossy labels other than the specified type are not supported. After printing, allow the disc to dry naturally. Touching or splashing with water immediately after printing may cause blurring or stickiness. Printable area Standard Wide Interface RAM HDD disk space free HDD rotational speed Display Sound (for music media) USB 2.0 ≥ 512MB (≥ 1GB for Vista) ≥ 10GB (≥ 25GB for Vista) ≥ 7200 rpm ≥ XGA resolution, 65536 colors sound device and supported driver must be installed Note: If your file system is FAT, you may not be able to write on DVDs. This device cannot be used by a computer with a USB port that contains a specific chip set made by ATI. This is because the ATI's chip set does not support USB 2.0. Some ATI chip sets using the Southbridge IXP SB460 or lower are listed below: - Radeon Xpress 200M /IXP SB450 /IXP SB460 - Radeon Xpress 1100 /IXP SB450 /IXP SB460 - Radeon Xpress 1150 /IXP SB460 - Radeon Xpress 1250 /IXP SB460 - Radeon 9100 IGP /IXY 150 {1.77"} 45 mm {4.57"} 116 mm {1"} 25.5 mm {4.57"} 116 mm Connections Connection Description USB USB 2.0 high-speed 480 Mbps transfer rate (high-speed device) Power Note: You must use the USB cable supplied. Input voltage Frequency Current Power consumption (approximate) 100 - 240 V (rated) 50 - 60 Hz (rated) 1 A (rated) 41 W (operating) 24 W (idle) 8/09 Epson Discproducer PP-100 - 1