Epson PowerLite 955WH Operation Guide - EasyMP Multi PC Projection - Page 18

Network, Network Configuration, Wired LAN, Connect a LAN cable to the projector.

Get Epson PowerLite 955WH PDF manuals and user guides View all Epson PowerLite 955WH manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

1. Contact your network administrator and check that DHCP is available under the current network environment. Note: If DHCP is not available, write down the following values that are available for your projector. • IP Address • Subnet Mask • Gateway Address 2. Connect the computer to the network. Note: To set up a network connection, if necessary, see the documentation supplied with your computer or network adapter. 3. Connect a LAN cable to the projector. 4. Turn on the projector. 5. Press the Menu button on the remote control or the control panel, select the Network menu, and select Network Configuration. 6. Select Wired LAN. A screen like one of the following is displayed. 7. Select IP settings as necessary. • DHCP is available: Set DHCP to On. 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
1.
Contact your network administrator and check that DHCP is available under the current network
environment.
Note:
If DHCP is not available, write down the following values that are available for your projector.
• IP Address
• Subnet Mask
• Gateway Address
2.
Connect the computer to the network.
Note:
To set up a network connection, if necessary, see the documentation supplied with your
computer or network adapter.
3.
Connect a LAN cable to the projector.
4.
Turn on the projector.
5.
Press the
Menu
button on the remote control or the control panel, select the
Network
menu, and
select
Network Configuration
.
6.
Select
Wired LAN
.
A screen like one of the following is displayed.
7.
Select IP settings as necessary.
• DHCP is available: Set
DHCP
to
On
.
18