Epson PowerLite Home 20 Quick Start - Page 4
Plug in and turn - lamp
View all Epson PowerLite Home 20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
4 Plug in and turn on 1 Remove the lens cover. Then connect the power cord to the projector and plug it into an electrical outlet. The power light turns orange. Power light 2 Turn on your connected video equipment. 3 Aim the remote control at the projector or the screen and press the On button (or press the Power button on the projector). You hear a beep, the power light flashes green, and the projector lamp starts to come on. On button NOTE The lamp reaches maximum brightness in about 45 seconds. Turning off the projector 1 When you're finished using the projector, press the Off button on the remote control. The power light flashes orange as the projector cools down. 2 When the power light is a steady orange, unplug the projector. Caution: Never unplug the projector when the power light is green or flashing orange.