Epson PowerLite W16SK User's Guide - Page 115
Solutions When the Image Contains Noise or Static, Solutions When the Image is Fuzzy or Blurry
View all Epson PowerLite W16SK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Related references Supported Video Display Formats Solutions When the Image Contains Noise or Static If the projected image seems to contain electronic interference (noise) or static, try the following solutions: • Check the cables connecting your computer or video source to the projector. They should be: • Separated from the power cord to prevent interference • Securely connected at both ends • Not connected to an extension cable • Check the settings on the projector's Signal menu to make sure they match the video source. If available for your video source, adjust the Progressive and Noise Reduction settings. • Select a computer video resolution that is compatible with the projector. • If you are projecting from a computer, press the Auto button on the remote control to automatically adjust the Tracking and Sync settings. • If you connected extension power cables, try projecting without them to see if they caused interference in the signal. Parent topic: Solving Image or Sound Problems Related references Input Signal Settings - Signal Menu Supported Video Display Formats Solutions When the Image is Fuzzy or Blurry If the projected image is fuzzy or blurry, try the following solutions: • Adjust the image focus. • Clean the product's lenses. Note: To avoid condensation on the lenses after bringing the product in from a cold environment, let the product warm up to room temperature before using it. • Position the projector close enough to the screen, and directly in front of it. 115