Epson Stylus 1000 User Manual - Page 59
Network interface mode, Mixed text/graphics mode, Auto line feed, Auto interface selection
View all Epson Stylus 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Adjust your top-of-form position with the micro-feed feature to get half of the margin at the bottom of one page and half at the top of the next page. Network interface mode If your printer is connected to a single computer, leave this feature off. If you want to use the printer in a network environment and share it among multiple computers, set this feature to on. Note: When this feature is set to on, data may be present in the printer's buffer even though the printer is not continuously printing. Always make sure the DATA light is off before turning off the printer. Mixed text/graphics mode This feature is for software that has problems printing scalable font text combined with graphics. Leave the mixed text/graphics mode set to off if you don't notice any problems in your printout. Auto line feed When the auto line feed feature is on, each carriage return (CR) code is accompanied by a line feed (LF) code. If your printed text is unexpectedly double-spaced, set this feature to off. If text lines print on top of each other, set it to on. Auto interface selection This feature is necessary when an optional interface card is installed and interface cables are connected to both the parallel interface and the optional interface card. 3-10 Using the Printer