Epson Stylus Photo R3000 Basics - Page 46
Network Setup, Wireless Network Setup
View all Epson Stylus Photo R3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Network Setup Make sure you follow the instructions on the Start Here sheet to set up your product, choose your connection, and install the software. The on-screen instructions during the installation process help you set up your network connection. Follow the instructions in this chapter only if you need additional help: ■ For wireless network setup, see below. ■ For wired network (Ethernet) setup, see page 54. Wireless Network Setup The steps in this section provide detailed instructions for setting up your product on a wireless network. You will need to install the software on every computer that will print to your product. Temporary use of a USB cable (not included) is recommended for the first installation only. After the product is connected to the network, you will be prompted to remove the USB cable. If you are using Mac OS X 10.6 or don't have a USB cable, you can use the buttons on the product to select wireless settings instead. Note: If you have trouble setting up your product, see "Solving Problems" on page 57. You can also watch a video tutorial at: www.epson.com/support/wireless. ■ If this is the first time that you're installing the product, see "Installing for the First Time" on page 47. ■ If your product is already on your wireless network and you need to set up additional computers to print to the product, see "Setting Up Additional Computers" on page 52. 46 Network Setup