Epson Stylus Pro 4880 Portrait Edition Quick Reference Guide - Page 3

Loading Paper in the Tray Make sure the printer is on and roll paper is not loaded for printing. 1 If your paper size is A3 or larger, pull out the paper tray and cover. 5 Load the sheets in the portrait orientation, short edge first, with the printable side face-down. Place the paper all the way back, against the right side of the tray. 2 Lift up the paper tray cover. Don't load paper above the arrow mark inside the edge guide. Caution: When you add more paper, always line up the edges with the paper already in the tray. 3 Flip up the paper guide roller and slide the edge guide all the way to the left. 6 Adjust the paper tray and edge guide according to the paper size. For sheets smaller than A3, raise the paper guide and move it to the edge of the stack. 4 Thumb through a stack of paper, then gently tap it on a flat surface to even the pages. 7 Flip down the paper guide roller, adjust the length of the paper tray cover (if necessary), then replace the paper tray cover. Note: Make sure the roll paper support is not raised. 8 Press the paper source button until you see the 2 cut sheet icon.