Epson Stylus Pro 4880 Portrait Edition Quick Reference Guide - Page 9

Control Panel Messages Status messages These messages indicate normal phases of printer operation. Message Light Explanation or response READY Pause light off Printer is ready to print. PRINTING Pause light flashing Printer is receiving data. RESET All lights flash briefly Printer is resetting. PRESS PAUSE BUTTON Pause light on Press the pause button to continue. PLEASE WAIT Pause light flashing Printer is initializing or performing maintenance. Wait until READY appears. PAUSE Pause light on Printer is paused. To resume printing, press the pause button. CUTTING Printer is cutting the paper. CHARGING INK Printer is charging the ink delivery system. Wait until READY appears. Error messages For a complete list of error messages, see your Printer Guide. Message INK LOW Light Ink light flashing REPLACE INK CRTG Ink light on CHANGE PAPER TYPE Paper light on LOAD PAPER SET PAPER LEVER RELOAD PAPER Paper light on Paper light on MNT TNK FULL Ink light on Explanation Response Ink cartridge(s) are nearly Replace ink cartridge(s) indicated expended (printing continues). on LCD. See page 5. Ink cartridge(s) are expended Replace ink cartridge(s) indicated (printing stops). on LCD. See page 5. The paper source setting in print options is different from the control panel setting. Make sure the right paper is loaded and the paper source setting is the same on the control panel and print options. The paper lever is in the released position. Move the paper lever to the secured position. The printer cannot detect the paper. Make sure paper is loaded correctly and the paper lever is secured. If you're using cut sheets, make sure the paper is flat. The maintenance tank is full. Replace the maintenance tank. See page 7. Continue 8 ▲