Epson Stylus Pro 4880 Portrait Edition Quick Reference Guide - Page 8

Replacing Printer Parts (continued) 4 Hold down the side pin, as shown, then turn the latch to the right. Replacing the Maintenance Tank You need to replace the Maintenance Tank (part # C12C890191) when you see MNT TNK FULL on the LCD display. The ink light also turns red. Note: If you are using 220 ml ink cartridges, remove the four cartrides from the right ink compartment, then close the compartment cover. 1 Pull out the maintenance tank as shown. 5 Release the side pin and carefully remove the cutter blade. 6 Insert the new cutter blade. Caution: Do not tip the tank, or ink may spill out. 2 Place the used tank in the plastic bag included with the new tank. 3 Insert the new tank. 7 Hold down its side pin and secure it with the latch. Note: If you removed any 220 ml ink cartridges, replace them after inserting the new maintenance tank. 8 Close the top cover. The carriage returns to the home position and the cutter replacement is complete. 7