Epson Stylus Pro 9880 UltraChrome User's Guide - Page 21
Setting Up the Printer, Assemble the left leg and base in the same way.
View all Epson Stylus Pro 9880 UltraChrome manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Setting Up the Printer | 21 Note: Make sure you tighten all bolts before moving to the next section. 2. Insert the right leg into the right base as shown. (The bases and legs are labeled L and R.) Use the large hex wrench included with the stand to fasten the leg with the two base bolts. Bolt holes Underside view of base showing location of bolt holes 3. Assemble the left leg and base in the same way. 4. Attach the bottom horizontal strut as shown, then fasten it with one strut bolt at each end. Make sure the bolts are tight. 21
21
Setting Up the Printer
|
21
2.
Insert the right leg into the right base as shown. (The bases and legs are
labeled
L
and
R.
) Use the large hex wrench included with the stand to
fasten the leg with the two base bolts.
3.
Assemble the left leg and base in the same way.
4.
Attach the bottom horizontal strut as shown, then fasten it with one
strut bolt at each end. Make sure the bolts are tight.
Note:
Make sure you
tighten all bolts before
moving to the next
section.
Bolt holes
Underside view of base
showing location of bolt holes