Epson Stylus Pro Product Information Guide - Page 3

EPSON Stylus Pro and Pro XL Color ink cartridge (S020036): Colors Cyan, magenta, and yellow Print capacity* In each color, approximately 1.2 million characters (670 sheets/color, letter, 5% duty at 360 dpi) Cartridge life* 2 years from production date and up to 6 months after opening the package at 77° F (25° C); based on letter size paper Temperature Storage: −22 to 104° F (−30 to 40° C) 1 month at 104° F (40° C) Transit: −22 to 140° F (−30 to 60° C) 1 month at 104° F (40° C) 120 hours at 140° F (60° C) Freezing:** 21.2° F (−6° C) Dimensions 2.1 inches (W) × 2.7 inches (D) × 1.7 inches (H) (54 mm × 67.4 mm × 41.8 mm) * The cartridge life may vary. If you often print large graphics and dense text, you will use up ink cartridges faster than if you print pages with less ink coverage. Cleaning the print heads more often than necessary will also consume ink. ** The ink thaws in approximately 2 hours at 77°F (25°C). c Caution: t Use only genuine EPSON ink cartridges and do not refill them. Other products may cause damage to your printer that is not covered by EPSON's warranties. t Do not use an ink cartridge after the expiration date on the package. Mechanical Paper feed method: Friction with auto sheet feeder Print head life: 1 billion dots per nozzle Total print volume: 75,000 pages Dimensions and weight: Stylus Pro Width 19.0 inches (482 mm) Depth 20.9 inches (530 mm) Height 7.2 inches (182 mm) Weight 16.7 lb (7.5 kg) Stylus Pro XL Width 22.8 inches (580 mm) Depth 23.5 inches (597 mm) Height 7.2 inches (182 mm) Weight 22.1 lb (10 kg) Electrical Input voltage range: Rated frequency range: Input frequency range: Rated current: Power consumption: 103.5 to 132 V 50 to 60 Hz 49.5 to 60.5 Hz 0.6 A Approx. 20 W (during self test, LQ at 10 cpi) Environmental Temperature: Humidity: Operation 50 to 95° F (10 to 35° C) Storage* -4 to 140° F (−20 to 60° C) 1 month at 104° F (40° C) 120 hours at 140° F (60° C) Operation 20 to 80% RH Storage* 5 to 85% RH (without condensation) * Stored in shipping container Safety Approvals Safety standards: UL 1950 with D3, CSA 22.2 950 with D3 R.F.I.: FCC part 15 subpart B class B Fonts The printer comes with an installed set of fonts, which are selectable with the Font button on the control panel. However, the printer always uses the fonts selected through the software program. The only time you need to select the printer's installed fonts is when the software program does not allow you to select fonts. Interface Specifications The printer is equipped with an 8-bit parallel interface and a serial interface. Parallel Interface Data format: 8-bit parallel, IEEE P1284 mode compatible Synchronization: STROBE pulse Handshake timing: BUSY and ACKNLG signals Signal level: TTL compatible Connector: 36-pin, Centronics compatible Ink Jet Printers 8/1/95 EPSON Stylus Pro and Pro XL-3