Epson TM-P60 User Guide - Page 4

Specifications, Product name: PS-10, Trade name: Seiko Epson Corporation - thermal printer

Get Epson TM-P60 - Mobilink B/W Thermal Line Printer PDF manuals and user guides View all Epson TM-P60 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

English Specifications Print method Thermal line printing Print density 203 dpi × 203 dpi [dpi: dots per 25.4 mm (dots per inch)] Printing width (default) 52.5 mm {2.1"}, 420 dot positions Print font Font Font A: 12 × 24, Font B (default): 10 × 24, Font C: 8 × 16 Characters per line Font A: 35, Font B: 42, Font C: 52 Character size (W×H) Font A: 1.50 × 3.0, Font B: 1.25 × 3.0, Font C: 1.0 × 2.0 Character set 95 Alphanumeric, 48 International, 128 × 10 Graphic Paper Roll paper dimensions (default) 57.5 ± 0.5 mm {2.26 ± 0.02"} (59.5 ± 0.5 mm {2.34 ± 0.02"} by removing the spacer installed) Paper thickness 50 µm ~ 80 µm Paper roll spool diameter 18 mm {0.71"} outside Specified thermal Original: Kanzaki Specialty Paper (USA): P350 (paper paper thickness: 62 µm), P310 (paper thickness: 58 µm), P300 (paper thickness: 56 µm) Print speed Maximum 70 mm/s {2.76 in/s}, when number of dots per dot line is 64 dots or less (printing with a fully charged battery, at 25°C {77°F}, print density 100%) Interface Serial (RS-232C), Wireless (IEEE802.11b) Receive buffer 128 bytes Power consumption Specified battery Lithium-ion battery: Product name: LIP-2500, Trade name: Seiko Epson Corporation Output: DC 7.4 V Capacity: 2200 mAh AC adapter: Output voltage: DC 12 V EPSON PS-10 Input voltage: AC 100 V ~ 240 V (Model DA-42Y12) Product name: PS-10, Trade name: Seiko Epson Corporation Life Mechanism 10,000,000 lines printing Print head 100,000,000 dots Autocutter 500,000 cuts Temperature/ Operation humidity (Print quality guaranteed) 5 ~ 45°C {41 ~ 113°F}, 10 ~ 90% RH Storage Abnormal operations not found when the printer is left under the environment of 25°C {77°F}, 60% RH for 2 hours after it was left in the following conditions: High temperature and humidity: 50°C {122°F}, 90% RH for 120 hours High temperature: 70°C {158°F} for 120 hours Low temperature: -25°C {-13°F} for 120 hours Overall dimensions (mm) 103 × 159 × 65 {4.1 × 6.3 × 2.6 in} (W × D × H) Mass (with the battery, without roll Approx. 670 g {1.5 lb} paper) Note: For the battery specifications, see its instructions. iv

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
iv
English
Specifications
Note:
For the battery specifications, see its instructions.
Print method
Thermal line printing
Print density
203 dpi × 203 dpi [dpi: dots per 25.4 mm (dots per inch)]
Printing width (default)
52.5 mm {2.1"}, 420 dot positions
Print font
Font
Font A: 12 × 24, Font B (default): 10 × 24, Font C: 8 × 16
Characters per line
Font A: 35, Font B: 42, Font C: 52
Character size
(W
×
H)
Font A: 1.50 × 3.0, Font B: 1.25 × 3.0, Font C: 1.0 × 2.0
Character set
95 Alphanumeric, 48 International, 128 × 10 Graphic
Paper
Roll paper
dimensions
(default)
57.5 ± 0.5 mm {2.26 ± 0.02"}
(59.5 ± 0.5 mm {2.34 ± 0.02"} by removing the spacer
installed)
Paper thickness
50 μm ~ 80 μm
Paper roll spool
diameter
18 mm {0.71"} outside
Specified thermal
paper
Original: Kanzaki Specialty Paper (USA): P350 (paper
thickness: 62 μm),
P310 (paper thickness: 58 μm), P300 (paper thickness: 56 μm)
Print speed
Maximum 70 mm/s {2.76 in/s}, when number of dots per dot
line is 64 dots or less (printing with a fully charged battery, at
25°C {77°F}, print density 100%)
Interface
Serial (RS-232C), Wireless (IEEE802.11b)
Receive buffer
128 bytes
Power
consumption
Specified battery
Lithium-ion battery: Product name: LIP-2500, Trade name:
Seiko Epson Corporation
Output: DC 7.4 V
Capacity: 2200 mAh
AC adapter:
EPSON PS-10
(Model DA-42Y12)
Output voltage: DC 12 V
Input voltage: AC 100 V ~ 240 V
Product name: PS-10, Trade name: Seiko Epson Corporation
Life
Mechanism
10,000,000 lines printing
Print head
100,000,000 dots
Autocutter
500,000 cuts
Temperature/
humidity
Operation
(Print quality
guaranteed)
5 ~ 45°C {41 ~ 113°F}, 10 ~ 90% RH
Storage
Abnormal operations not found when the printer is left under
the environment of 25°C {77°F}, 60% RH for 2 hours after it
was left in the following conditions:
High temperature and humidity: 50°C {122°F}, 90% RH for
120 hours
High temperature: 70°C {158°F} for 120 hours
Low temperature: -25°C {-13°F} for 120 hours
Overall dimensions (mm)
103 × 159 × 65 {4.1 × 6.3 × 2.6 in} (W × D × H)
Mass (with the battery, without roll
paper)
Approx. 670 g {1.5 lb}