Epson TM-P60 User Guide - Page 9
Safety Label, Purpose of This Manual, Notes on Use, Notes on Installation - power supply
View all Epson TM-P60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English WARNING: Keep the battery pack away from fire or flame if it produces a strange odor or leakage. Otherwise fire or explosion may occur. Should any battery liquid get on skin or clothing, promptly wash it off with clean water. If you do not, the liquid may damage your skin. Do not expose the battery to water. Do not allow water to contact the terminals. This may cause fire, overheating, or electric shock. Be sure to use and charge the battery that came with the printer. Using a battery other than the one specified may cause fire, explosion, leakage, overheating, or other damage. Safety Label CAUTION: During printing or after printing, the thermal head can be very hot. Purpose of This Manual This manual provides information to operators of the TM-P60 printer to describe basic operations to enable safe and correct use of the printer. Notes on Use ❏ Be sure to use the power switch to turn the printer on and off. ❏ Do not unplug or plug in the AC adapter during printing. ❏ Be sure not to open the roll paper cover when the printer is operating. ❏ Protect the printer from impact. ❏ Do not apply excessive force to the printer case. ❏ Do not place food or beverages such as coffee on the case of the printer. Notes on Installation ❏ Be sure that the printer is installed horizontally when you install it on a table. ❏ Be sure that the roll paper side is on the bottom when you install the printer vertically. Notes on the Rechargeable Battery Before using the printer for the first time, charge the battery. The safety precautions for the rechargeable battery are described previously in this manual. For more details, see the battery instructions that came with the printer. Notes on AC Adapter Use the specified AC adapter (EPSON PS-10, Model: DA-42Y12) only. Power Supply Cable Requirements For US and Canada: UL and CSA Approved; Plug: AC125V, 7A or more, NEMA 5-15P, Cable: 6 to 10 feet long, 3*AWG 18, SPT-2 or heavier, Connector: AC125V, 7A or more. TM-P60 User's Manual (IEEE802.11b) 5