Epson TM-m50II ePOS-Print XML Users Manual - Page 108

Chapter 4 XML Reference - XML for Controlling Printer This element allows you to cut paper. Attribute When "type" is not specified, "feed" is applied. type Attribute value "no_feed" "feed" "reserve" "feed_fullcut" "no_feed_fullcut" "reserve_fullcut" Description Cut without feed (cut the sheet without feeding paper) Feed cut (cut the sheet after feeding paper) Cut reservation (print the following texts and cut the sheet at the cutting position). Feed full cut (cut the sheet after feeding paper). Full cut without feed (cut the sheet without feeding paper). Full cut reservation (print the following texts and full cut the sheet at the cutting position). Sample program Feeds paper and then cuts it. Supplementary explanation ❏ This does not work in the page mode. ❏ When setting this element, set it at the beginning of a line. ❏ If print data is not specified after the cut reservation (reserve), the printer will execute the cut after feed- ing paper up to the position of the reserved cut. ❏ Depending on the printer, it may wait approximately 2 seconds for the print data after the cut reserva- tion (reserve) before starting the paper feed operation. ❏ When using the cut reservation (reserve), set the length of one receipt to at least 20 mm. 108