Epson TM-m50II ePOS-Print XML Users Manual - Page 433

Appendix Setting Perform the print setting and the preview setting. Select the [Setting] tab to display the Setting screen. Model Item IP address of ePOS-Print supported TM printer Device ID of the target printer Print timeout (milliseconds) Monitor the status Drawer open status Use print job ID *1 Use HTTPS *2 Description Specify the series name of the printer to be used for printing. The Preview screen resizes according to the paper width set to the model. Specify the IP address of the printer. Be sure to specify this item. Specify the device ID of the printer. Be sure to specify this item. Specify the print timeout time in milliseconds. The maximum value is 60000 (60 seconds). When this checkbox is checked, the printer's status is monitored. Change this according to the specifications of the drawer that you are using. Check this for a print job ID to be assigned when printing. Check this to use HTTPS to communicate with the printer to print. *1 TM-DT Software Ver.3.0 or later/TM-i firmware Ver.4.1 or later/TM-T88VI *2 Printers that support HTTPS (Printer Functions (p.15)) 433