Epson TM-m50II ePOS-Print XML Users Manual - Page 426

Chapter 6 Development Information for Customer Displays - Programming Guide (XML Print Service) Customer Display End Point Address Specify the customer display end point address in the following format: To Call SOAP/HTTP Interface http://[IP address]/cgi-bin/eposDisp/service.cgi?devid=[device ID]&timeout=[timeout time] To Call SOAP/HTTP Interface (WSDL supported) http://[IP address]/cgi-bin/eposDisp/service.cgi Items to specify IP address Device ID Timeout period Description Specify the IP address or the domain name of the TM printer connected to the customer display. The device ID of the customer display is fixed to "local_display". Specifies the time to abort the process in milliseconds. The maximum value is 300 seconds (300000). The timeout parameter is optional; when it is omitted, 60 seconds (60000) is set. When the timeout period elapses, the print job is canceled; the data already interpreted by the printer before the start of the print abort process is printed. For SOAP/HTTP Interface (WSDL supported), the device ID and timeout time are specified in the SOAP header. 426