Epson TM-m50II Epson POS Printer WebAPI Interface Specification - Page 11
Table 3-5 Network Basic Settings, Table 3-6 Wired LAN Settings, Table 3-7 Wired LAN Settings
View all Epson TM-m50II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
WirelessBand IPAddressPrint int Wireless Band Setting 0 : Auto 1 : 2.4GHz 2 : 5Ghz int IP Address Print Setting 0 : Disable 1 : Enable Table 3-5 Network Basic Settings "WiredLAN" settings can be set as below. Name Value type LinkSpeed int IEEE8023AZ int Value Link Speed & Duplex 0 : Auto (In this mode, the Device can communicate with all of the communication speeds including 1000BASE-T) 1 : 10BASE-T Half 2 : 10BASE-T Full 3 : 100BASE-T Half 4 : 100BASE-T Full IEEE802.3az setting 0 : Disable 1 : Enable Table 3-6 Wired LAN Settings "WiFi" settings can be set as below. Name Value type WiFiEnable int ConnectionMode int SSID SecuritySetting string int SecurityKey string Value Wi-Fi Enable 0 : Disable(Wired LAN Enable) 1 : Enable Connection Mode 0 : Infrastructure 1 : Adhoc When "WiFiEnable" is set to Disable, this item is unnecessary. SSID 1 - 32 characters in ASCII When "WiFiEnable" is set to Disable, this item is unnecessary. Security Level 0 : None 1 : WEP64 2 : WEP128 3 : TKIP 4 : AES 5 : WPA None 6 : WEP Unknown 7 : WPA2-Enterprise 9 : Unknown When "WiFiEnable" is set to Disable, this item is unnecessary. Security Key 0, 5, 8 - 63 characters in ASCII When "WiFiEnable" is set to Disable, this item is unnecessary. Table 3-7 Wired LAN Settings Epson POS Printer WebAPI Interface Specification Revision A M00152302 September 8, 2022 Page: 11