Epson TM-m50II Epson POS Printer WebAPI Interface Specification - Page 9

TimeFormat TimeDifference UseTimeServer TimeServerAddr UpdateInterval int int int string int Time Format 0 : 12h 1 : 24h Time Difference UTC -12:45 - +13:45 (in unit of time equal to 15min) -51 - 55 (-1 means -15min, +1 means +15min) Use Time Server (SNTP) 0 : Do Not Use 1 : Use Time Server (SNTP) Address IPv4, IPv6, FQDN When "UseTimeServer" is Do Not Use, this item is unnecessary. Update Interval(min) 1 - 10080 When "UseTimeServer" is Do Not Use, this item is unnecessary. Table 3-4 Date and Time Settings 3.1.4. Network Settings "NetworkSettings" consists of three portions, "Basic", "WiredLAN", and "WiFi". "Basic" settings can be set as below. Name Value type DeviceName string Location string ObtainIPAddr int BOOTPSetting int APIPASetting int IPAddr SubnetMask DefaultGateway DNSServerSetting PrimaryDNS string string string int string SecondaryDNS string Value Printer Name 2 - 15 characters in ASCII Location 0 - 127 bytes in UTF-8 Obtain IP Address 0 : Auto 1 : Manual Set using BOOTP 0 : Disable 1 : Enable When "ObtainIPAddr" is Manual, this item is unnecessary. Obtain IP address using Automatic Private IP Addressing(APIPA) 0 : Disable 1 : Enable When "ObtainIPAddr" is set to Manual, this item is unnecessary. IP Address(IPv4) IPv4 format When "ObtainIPAddr" is set to Auto, this item is unnecessary. Subnet Mask IPv4 format When "ObtainIPAddr" is set to Auto, this item is unnecessary. Default Gateway IPv4 format When "ObtainIPAddr" is set to Auto, this item is unnecessary. DNS Server Setting 0 : Auto 1 : Manual Primary DNS Server IPv4 format When "DNSServerSetting" is set to Auto, this item is unnecessary. Secondary DNS Server IPv4 format When "DNSServerSetting" is set to Auto, this item is unnecessary. Epson POS Printer WebAPI Interface Specification Revision A M00152302 September 8, 2022 Page: 9