Epson TM-m50II Epson POS Printer WebAPI Interface Specification - Page 23
Table 3-16 Protocol Settings, Table 3-17 WiFi Direct Settings
View all Epson TM-m50II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
UserName AuthAlgorithm string int AuthPassword EncryptAlgorithm string int EncryptPassword ContextName EnableEPOSPrint EPOSPrtDeviceID string string int string "WiFiDirect" settings can be set as below. User Name 1 - 32 bytes in UTF-8 When "EnableSNMPv3" is set to Disable, this item is unnecessary. Authentication Algorithm 0 : MD5 1 : SHA-1 When "EnableSNMPv3" is set to Disable, this item is unnecessary. Authentication Password 8 - 32bytes in ASCII When "EnableSNMPv3" is set to Disable, this item is unnecessary. Encryption Algorithm 0 : DES 1 : AES128 When "EnableSNMPv3" is set to Disable, this item is unnecessary. Encryption Password 8 - 32 bytes in ASCII When "EnableSNMPv3" is set to Disable, this item is unnecessary. Context Name 0 - 32 bytes in UTF-8 When "EnableSNMPv3" is set to Disable, this item is unnecessary. Enable ePOS-Print 0 : Disable 1 : Enable Device ID 1 - 30 characters A-Z, a-z, 0-9, -, _, . Table 3-16 Protocol Settings Name DisableWiFiD WiFiDirectEnable ObtainIPAddr IPAddr Password SSID Value type int int int string string string Value Used to change the availability of the Wi-Fi Direct settings on the Panel 0 : Disable (Locked) 1 : Enable (Unlocked) Enable or Disable Wi-Fi Direct 0 : Disable 1 : Enable Obtain Method of IP Address 0 : Auto 1 : Manual IP Address(IPv4) IPv4 format(ex. "127.0.0.1") When "ObtainIPAddr" is Auto, this item is unnecessary. Password 8 - 22 characters in ASCII. SSID 10 - 22 characters in ASCII. It must contain "DIRECT-" at the begining. Table 3-17 WiFi Direct Settings Epson POS Printer WebAPI Interface Specification Revision A M00152302 September 8, 2022 Page: 23