Epson VS400 User Manual - Page 107
Solutions to Problems With the Remote Control, Solutions to Password Problems
View all Epson VS400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Related tasks Unlocking the Projector's Buttons Solutions to Problems With the Remote Control If the projector does not respond to remote control commands, try the following solutions: • Check that the remote control batteries are installed correctly and have power. If necessary, replace the batteries. • Make sure you are operating the remote control within the reception angle and range of the projector. • Check to see if a button on the remote control is stuck down, causing it to enter sleep mode. Release the button to wake the remote control up. • Strong fluorescent lighting, direct sunlight, or infrared device signals may be interfering with the projector's remote receivers. Dim the lights or move the projector away from the sun or interfering equipment. • If available, turn off one of the remote receivers in the projector's menu system, or check if all the remote receivers were turned off. • If you assigned an ID number to the remote control to operate multiple projectors, you may need to check or change the ID setting. • If you lose the remote control, you can order another one from Epson. Parent topic: Solving Projector or Remote Control Operation Problems Related concepts Projector Identification System for Multiple Projector Control Related references Remote Control Operation Projector Feature Settings - Settings Menu Optional Equipment and Replacement Parts Solutions to Password Problems If you cannot enter or remember a password, try the following solutions: • You may have turned on password protection without first setting a password. Try entering 0000 using the remote control. • If you have entered an incorrect password too many times and see a message displaying a request code, write down the code and contact Epson. 107